UC2637NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Weight | 1.206102g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES -2.5V TO -20V SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | BIPOLAR |
| Voltage - Supply | 2.5V~20V |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UC2637 |
| Function | Controller - Commutation, Direction Management |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Max Output Current | 400mA |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 8.5mA |
| Output Configuration | Pre-Driver - Half Bridge (4) |
| Output Current | 100mA |
| Collector Emitter Voltage (VCEO) | 36V |
| Max Collector Current | 100mA |
| Motor Type - AC, DC | Brushed DC |
| Height | 5.08mm |
| Length | 22.48mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2637NG4 Overview
This package is designed to work with [0].The part is packged with 18-DIP (0.300, 7.62mm) case.To mount the part by [0], it is recommended that you do so.The component connected in General Purposematches it perfectly.2.5V~20V volts can be supplied by the device.Regarding the operating temperature, it is in the range of -25°C~85°C TA°C.Motors can be classified as Brushed DC.There are 18 terminations available in the part.Drivers controllers is very important to keep in mind that this amplifier should be operated at 15V.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.Based on the UC2637part number, it is found.This device is designed with a pin count of 18.Drivers controllers is a part of the Motion Control Electronics series.The available outputs are [0].Continually maintains the output voltage at 13.5V.Featuring a 100mAoutput current, this device provides maximum design flexibility.Also, ALSO REQUIRES -2.5V TO -20V SUPPLYcan be found as a characteristic of this type.For compliance with the operation requirements, the maximum output current is [0].
UC2637NG4 Features
Applications : General Purpose
base on UC2637 number
designed with 1 outputs
Additional Feature: ALSO REQUIRES -2.5V TO -20V SUPPLY
UC2637NG4 Applications
There are a lot of Texas Instruments UC2637NG4 motor drivers applications.
- Alternative to HID lights
- Emergency lighting
- Industrial high-bay lights
- Automotive exterior and interior lighting
- Industrial lighting
- Indicator
- Smart lighting applications
- LED ballasts
- Tail lights
- Mobile phone display backlight and key light driving
