UC2705N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~40V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UC2705 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 20V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 1W |
| Output Current | 1.5A |
| Max Supply Current | 4mA |
| Propagation Delay | 100 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 100 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 90ns |
| Fall Time (Typ) | 60 ns |
| Output Polarity | TRUE AND INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.06 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2705N Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Gate drivers is packaged in the way of Tube.In the direction of Through Hole, gate drivers is mounted.Using a 5V~40V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.There is a gate type of N-Channel MOSFET in this design.Mosfet driver is possible to use this device at temperatures as low as -25°C~85°C TA.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.The configuration is based on 8 terminations.Many related parts can be found under its base part number UC2705.Devices are mounted by Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is designed specifically to run on 20V volts of power.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is a maximum output current of 1.5A.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.There are 1 outputs integrated for its basis.This device supports a current output of 1.5A at the output.Its maximum power dissipation of 1W also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended to keep the supply current at 4mA to ensure greater stabilMosfet gate driversy.Mosfet gate drivers is recommended that you set the operating supply voltage to 20V.There is a STANDARD value associated with its input.
UC2705N Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1W
UC2705N Applications
There are a lot of Texas Instruments UC2705N gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- PCMCIA applications
- AC-DC Inverters
- Welding
- High current laser/LED systems
- Industrial motor drives - compact, standard, premium, servo drives
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Smart Phones
