UC2705NG4
| Parameters | |
|---|---|
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 1.5A |
| High Side Driver | NO |
| Turn Off Time | 0.06 µs |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| JESD-609 Code | e4 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 1W |
| Element Configuration | Single |
| Nominal Supply Current | 4mA |
| Power Dissipation | 1W |
| Max Supply Current | 4mA |
| Current - Output | 1.5A |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 90ns |
| Fall Time (Typ) | 60 ns |
| Output Polarity | TRUE AND INVERTED |
| Input Characteristics | STANDARD |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
UC2705NG4 Overview
In order to increase flexibility, the package PDIP is used.Its configuration is based on a total of 8 terminations.The device is mounted with Through Hole.In the device, there are 8 pins.In addition, it is specifically designed to operate with a supply voltage of 20V.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is a maximum output current of 1.5A.Several electronic components are included in its subcategory of MOSFET Drivers.There are 8 component pins on the board.Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.Operating temperatures cannot exceed 85°C.-40°C is the minimum permissible operating temperature.In order to ensure greater stability, it is recommended to keep the supply current at 4mA.When the supply voltage is 40V, it is at its maximum operation.In order for it to operate, the supply voltage of 5V must be maintained.The current it outputs is 1.5A.The input of this algorithm is characterized by STANDARD.
UC2705NG4 Features
8 pins
UC2705NG4 Applications
There are a lot of Texas Instruments UC2705NG4 gate drivers applications.
- UPS systems
- Smart Phones
- Line drivers
- Motor Drives
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Industrial Modules
- High-voltage isolated DC-DC converters
- High frequency line drivers
- Commercial air-conditioning (CAC)
- PCMCIA applications
