UC2707DWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~40V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 20V |
| Base Part Number | UC2707 |
| Pin Count | 16 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 20V |
| Nominal Supply Current | 15mA |
| Max Supply Current | 15mA |
| Input Type | Inverting, Non-Inverting |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 60ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 180 ns |
| Output Polarity | TRUE AND INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 40ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.065 µs |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2707DWTR Overview
The 16-SOIC (0.295, 7.50mm Width) package provides greater flexibility.Tape & Reel (TR) is the form of the package.Configuration is supported by 2 drivers.Its recommended mounting way is Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 5V~40V supply voltage.This device is designed with a N-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as -25°C~85°C TA.The input type is Inverting, Non-Inverting.16 terminations constitute its foundation.Numerous related parts are available for its base part number UC2707.Mosfet driver is mounted using Surface Mount.In the device, there are 16 pins.In addition, it is specifically designed to operate with a supply voltage of 20V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 1.5A can be achieved at maximum power.Several electronic components are included in its subcategory of MOSFET Drivers.On the board, there are 16 component pins.As a precaution, make sure the supply current is kept at 15mA.During the operation of the system, the voltage of the operating supply should be set to 20V.Mosfet gate drivers receives an input of STANDARD.
UC2707DWTR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
16 pins
UC2707DWTR Applications
There are a lot of Texas Instruments UC2707DWTR gate drivers applications.
- High power buffers
- Solar inverters
- Welding
- Industrial Modules
- Active filtering
- Digitally controlled power supplies
- Commercial and agricultural vehicles (CAV)
- UPS systems
- Power factor correction (PFC) circuits
- Video amplifiers
