UC2708DWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 20V |
| Base Part Number | UC2708 |
| Pin Count | 16 |
| Max Output Current | 3A |
| Power Supplies | 10/35V |
| Nominal Supply Current | 26mA |
| Max Supply Current | 26mA |
| Propagation Delay | 25 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 ns |
| Rise Time | 45ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.055 μs |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2708DWTR Overview
A higher level of flexibility is provided by its 16-SOIC (0.295, 7.50mm Width) package.A package of Tape & Reel (TR) has been used.Configuration is based on 2 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is set to 5V~35V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.This device allows temperatures in the range of -25°C~85°C TA.The input type for this program is Non-Inverting.As a result of its configuration, it contains a maximum of 16 terminations.There are various parts that can be found under its base part number UC2708.Devices are mounted by Surface Mount.At the time of design, it is configured with 16 pins.With a supply voltage of 20V, it is designed to operate.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 3A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.On the board, there are 16 component pins.If you want a stable supply current, you should keep it at 26mA.The power supply of 10/35V is able to solve the power supply problems for a wide variety of applications.
UC2708DWTR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
UC2708DWTR Applications
There are a lot of Texas Instruments UC2708DWTR gate drivers applications.
- Isolated Supplies for Motor Control
- High frequency line drivers
- Digitally controlled power supplies
- Video amplifiers
- 3-Phase Motor Inverter Driver
- UPS systems
- AC-DC Inverters
- serial peripheral interface (SPI), I2C
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- DC/DC converters
