UC2708NE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~35V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 20V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UC2708 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Power Supplies | 10/35V |
| Nominal Supply Current | 26mA |
| Propagation Delay | 25 ns |
| Input Type | Non-Inverting |
| Rise Time | 45ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.055 μs |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| RoHS Status | ROHS3 Compliant |
UC2708NE Overview
In order to increase flexibility, the package 16-DIP (0.300, 7.62mm) is used.Tube represents the package.There are 2 drivers installed for this device.The device is mounted in the direction of Through Hole.In the absence of a 5V~35V supply voltage, it can demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device allows temperatures in the range of -25°C~85°C TA.Input type of Non-Inverting is used.The configuration starts with 16 terminations.There are various related parts under its base part number UC2708.Devices are mounted by Through Hole.There are 16 pins available in the device.The device is specifically designed to operate at 20V volts.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 3A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The component has 16 pins.With its 10/35V power supply, it provides power for diverse applications.
UC2708NE Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
UC2708NE Applications
There are a lot of Texas Instruments UC2708NE gate drivers applications.
- Digitally controlled power supplies
- Power factor correction (PFC) circuits
- Isolated switch mode power supplies (SMPS)
- Motor Drives
- UPS systems
- Video amplifiers
- Commercial and agricultural vehicles (CAV)
- DC/DC converters
- Industrial Power Supplies
- DC-DC Converters
