UC2709N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~40V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 20V |
| Base Part Number | UC2709 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 20V |
| Nominal Supply Current | 12mA |
| Power Dissipation | 1W |
| Max Supply Current | 12mA |
| Propagation Delay | 25 ns |
| Input Type | Inverting |
| Turn On Delay Time | 25 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 80ns |
| Fall Time (Typ) | 80 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2709N Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.A packaging method of Tube is indicated.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Through Hole is mounted in the way of the device.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 5V~40V supply voltage.Gate type N-Channel, P-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -55°C~125°C TJ.Mosfet driver accepts input of type Inverting.8 terminations constitute its foundation.Numerous related parts are available for its base part number UC2709.Mosfet driver is mounted using Through Hole.During design, it is configured with 8 pins.In order to operate, a voltage of 20V has to be applied.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 1.5A for this device.There are various useful electronic components in its subcategory MOSFET Drivers.8 pins are present on the component.Using 1W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.If you want a stable supply current, you should keep it at 12mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 20V volts.The input is characterized by STANDARD.
UC2709N Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1W
UC2709N Applications
There are a lot of Texas Instruments UC2709N gate drivers applications.
- Telecom switch mode power supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Solar inverters
- High frequency line drivers
- serial peripheral interface (SPI), I2C
- Automotive Applications
- RGB applications
- Uninterruptible Power Supplies (UPS)
- Head-up and Head mounted displays
- PCMCIA applications
