UC2710N
| Parameters | |
|---|---|
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 4.7V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UC2710 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 6A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 35mA |
| Power Dissipation | 1W |
| Output Current | 6A |
| Max Supply Current | 35mA |
| Propagation Delay | 30 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 30 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 80 ns |
| Output Polarity | TRUE AND INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 85ns 85ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
UC2710N Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Tube represents the package.Through Hole is mounted in the way of the device.When the supply voltage is set to 4.7V~18V, it can demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.There is a temperature range for this device of -55°C~150°C TJ.A type of Inverting, Non-Inverting is used for input in this program.The configuration is based on 8 terminations.There are numerous related parts listed under its base part number UC2710.In this case, Through Hole indicates how the device is to be mounted.A total of 8 pins are available on the device.In addition, it is specifically designed to operate with a supply voltage of 15V.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.The maximum output current can amount to 6A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.On the board, there are 8 component pins.The basis has 1 integrated outputs.An output current of 6A is supported.Based on the maximum power dissipation of 1W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.In order to ensure greater stability, it is recommended to keep the supply current at 35mA.During the operation of the system, the voltage of the operating supply should be set to 15V.The input of this algorithm is characterized by STANDARD.
UC2710N Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 1W
UC2710N Applications
There are a lot of Texas Instruments UC2710N gate drivers applications.
- 3-Phase Motor Inverter Driver
- RGB applications
- Motor Controls
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Gate Driver Supplies
- AC-DC Inverters
- White Goods - Air Conditioner, Washing Machine,
- Industrial Modules
- Dual-Battery Systems
- Line drivers
