UC2710NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| JESD-609 Code | e4 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 6A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.7V |
| Power Dissipation-Max | 1W |
| Nominal Supply Current | 35mA |
| Power Dissipation | 1W |
| Max Supply Current | 35mA |
| Current - Output | 6A |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 80 ns |
| Output Polarity | TRUE AND INVERTED |
| Input Characteristics | STANDARD |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 6A |
| High Side Driver | NO |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UC2710NG4 Overview
For greater flexibility, its PDIP package is used.Mosfet driver is based on 8 terminations.The mount method is Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.In order to operate, a voltage of 15V has to be applied.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 6A that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A board with 8 component pins is available.There are 1 outputs integrated for its basis.There is a maximum value of 85°C for the allowable operating temperature.There is a minimum operating temperature of -40°C.The supply current should be kept at 35mA to ensure higher stability.During operation, the supply voltage of 18V is its maximum value.4.7V is the minimum voltage required to operate it.The current it outputs is 6A.The input of this algorithm is characterized by STANDARD.
UC2710NG4 Features
8 pins
UC2710NG4 Applications
There are a lot of Texas Instruments UC2710NG4 gate drivers applications.
- A/D drivers
- Motor Controls
- Motor controllers
- PCMCIA applications
- Broadcast equipment
- Automotive Applications
- Video amplifiers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Digitally controlled power supplies
- Industrial Modules
