UC2710T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Weight | 1.930007g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BIPOLAR |
| Voltage - Supply | 4.7V~18V |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | UC2710 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Max Output Current | 6A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 35mA |
| Power Dissipation | 3W |
| Output Current | 6A |
| Max Supply Current | 35mA |
| Propagation Delay | 30 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 70ns |
| Fall Time (Typ) | 80 ns |
| Rise / Fall Time (Typ) | 85ns 85ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.08 µs |
| Height | 8.51mm |
| Length | 10.16mm |
| Width | 4.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2710T Overview
Gate drivers provides greater flexibilGate driversy to use the TO-220-5 package.A packaging method of Tube is used.It's mounted on the way to Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.7V~18V.The gate type on this device is IGBT, N-Channel MOSFET.Temperature range -55°C~150°C TJ is allowed for this device.Input type of Inverting, Non-Inverting is used.It's configured with 5 terminations.Numerous related parts can be found under its base part number UC2710.Mounting the device requires Through Hole.Devices have 5 pins available.A supply voltage of 15V is required for operation.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 6A for this device.This subcategory of MOSFET Drivers has a number of useful electronic components.On the board, there are 3 component pins.There are 1 outputs integrated for its basis.The output current supported by the device is 6A.The maximum power dissipation of 3W shows its maximum capability to transfer and conduct power loss without overheating.To maintain higher stability, the supply current should always be 35mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V.
UC2710T Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
5 pins
Maximum power dissipation of 3W
UC2710T Applications
There are a lot of Texas Instruments UC2710T gate drivers applications.
- Power factor correction (PFC) circuits
- Head-up and Head mounted displays
- Active filtering
- A/D drivers
- Motor Control
- White Goods - Air Conditioner, Washing Machine,
- Isolated Supplies for Motor Control
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- PCMCIA applications
- Pulse transformer drivers
