UC27131D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Base Part Number | UC27131 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Max Output Current | 700mA |
| Operating Supply Voltage | 65V |
| Power Supplies | 25V |
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Output Configuration | Low Side |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.5mA |
| Propagation Delay | 6 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 65V |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 300mA |
| Nominal Input Voltage | 65V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~65V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC27131D Overview
As a result, it is packaged in the form of a Tube.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of Bipolar volts has been specified.It comes under the family of UC27131.It contains 8 terminations.For operation, we use the 8 pins.The LED driver has 1 functions.It is necessary to reduce the maximum output current to 700mA to meet the operation criteria.Supply voltages of 25V allow for high efficiency.This LED driver is equipped with a total of 8 pins.When this case is used, the output current is set to 300mA.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.There is a voltage supply of 25V volts on this part.Optimal efficiency requires a voltage of 65V.This LED driving board can accept voltages up to 65V volts as an input.It requires 8V volts as the minimum input voltage.It requires 2.5mA current to operate.
UC27131D Features
Supplied from 25V
UC27131D Applications
There are a lot of Texas Instruments UC27131D Power Switches ICs applications.
- Wireless Headsets
- Set-Top Boxes
- Wireless/Networking Cards
- USB Protection
- Solid State Drivers
- Portable GPS
- Hot Swap
- Telecom and Network Systems
- USB3.1 Power Delivery
- Portable Music Players
