Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
25V |
Base Part Number |
UC27131 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
Bipolar |
Max Output Current |
700mA |
Operating Supply Voltage |
65V |
Power Supplies |
25V |
Interface |
On/Off |
Nominal Supply Current |
2.5mA |
Output Configuration |
Low Side |
Output Current |
300mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
2.5mA |
Propagation Delay |
6 μs |
Input Type |
Non-Inverting |
Turn On Delay Time |
6 μs |
Switch Type |
General Purpose |
Min Input Voltage |
8V |
Max Input Voltage |
65V |
Output Characteristics |
OPEN-EMITTER |
Output Current per Channel |
300mA |
Nominal Input Voltage |
65V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
8V~65V |
Driver Number of Bits |
1 |
Output Peak Current Limit-Nom |
0.9A |
Built-in Protections |
TRANSIENT; OVER CURRENT |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
UC27131DG4 Overview
It is packaged in the form of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of Bipolar volts can be achieved by this LED driver.There is a UC27131 family of things that it belongs to.A total of 8 terminations have been recorded.The 8 pins are used to operate the LED driver.It consists of 1 functions.As a result, the maximum output current is reduced to 700mA in order to meet the operation requirements.It is possible to obtain high efficiency with a supply voltage of 25V.There are 8 pins in total on this board.The output current is set to 300mA in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part is powered by 25V.In order to maximize efficiency, the supply voltage should be set to 65V.This LED driver can handle voltages up to 65V volts.It requires 8V volts as the minimum input voltage.For its operation, a maximum current requirement of 2.5mA is required.
UC27131DG4 Features
Supplied from 25V
UC27131DG4 Applications
There are a lot of Texas Instruments UC27131DG4 Power Switches ICs applications.
- USB Power Distribution
- Gaming
- Hot Swaps
- Storage Drives
- Hot Swap
- Handheld Devices
- Smart Phones, Feature Phones
- PDAs
- Storage (HDDs, SSDs)
- PC Cards