UC27131N
| Parameters | |
|---|---|
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UC27131 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Max Output Current | 700mA |
| Operating Supply Voltage | 65V |
| Power Supplies | 25V |
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Output Configuration | Low Side |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.5mA |
| Propagation Delay | 6 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 65V |
| Output Current per Channel | 300mA |
| Nominal Input Voltage | 65V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~65V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
UC27131N Overview
It is packaged in the form of a Tube.This file is included in package 8-DIP (0.300, 7.62mm).Mounting type Through Hole is selected for the LED driving board.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.Voltage output is Bipolar volts at maximum.The UC27131 family contains this object.A total of 8 terminations have been recorded.It is necessary to use the 8 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 700mA in order to meet the operation requirements.Using a voltage of 25V allows for high efficiency.8 pins are connected to it in total.The output current is set to 300mA in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.There is a voltage supply of 25V volts on this part.It is recommended that the supply voltage be set at 65V in order to achieve maximum efficiency.A maximum input voltage of 65V volts can be applied to it.There is a minimum input voltage of 8V volts for this LED driver.It requires a maximum current requirement of 2.5mA.
UC27131N Features
Supplied from 25V
UC27131N Applications
There are a lot of Texas Instruments UC27131N Power Switches ICs applications.
- Wearable Devices
- Notebook PC
- Solid State Drivers
- Wireless Headsets
- Hard Disk Drives
- Portable Video Game Players
- HDD, SSD
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Portable GPS Device
