banner_page

UC27131NG4

EAR99 Gate Drivers ICs P


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UC27131NG4
  • Package: P
  • Datasheet: -
  • Stock: 219
  • Description: EAR99 Gate Drivers ICs P (Kg)

Details

Tags

Parameters
Package / Case P
Surface Mount NO
Number of Pins 8
Weight 528.605208mg
JESD-609 Code e4
Pbfree Code yes
Number of Terminations 8
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Terminal Position DUAL
Terminal Form THROUGH-HOLE
Number of Functions 1
Supply Voltage 25V
Terminal Pitch 2.54mm
Pin Count 8
Number of Outputs 1
Max Output Current 700mA
Operating Supply Voltage 65V
Power Supplies 25V
Temperature Grade INDUSTRIAL
Nominal Supply Current 2.5mA
Max Supply Current 2.5mA
Current - Output 300mA
Propagation Delay 6 μs
Turn On Delay Time 6 μs
Min Input Voltage 8V
Max Input Voltage 65V
Output Current per Channel 300mA
Nominal Input Voltage 65V
Driver Number of Bits 1
Output Peak Current Limit-Nom 0.9A
Turn Off Time 700 µs
Built-in Protections TRANSIENT; OVER CURRENT
Output Current Flow Direction SOURCE SINK
Width 7.62mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

UC27131NG4 Overview


In order to increase flexibility, the package P is used.It's configured with 8 terminations.There are 8 pins available in the device.A voltage of 25V is required for its operation.700mA is the maximum output current.A board with 8 component pins is available.For its basis, there are 1 outputs integrated.Mosfet gate drivers is permissible to set the operating temperature to 85°C.-40°C is the minimum operating temperature.Mosfet gate drivers is recommended to keep the supply current at 2.5mA to ensure greater stabilMosfet gate driversy.With its 25V power supply, it provides power for diverse applications.The current it outputs is 300mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 65V volts.

UC27131NG4 Features


8 pins

UC27131NG4 Applications


There are a lot of Texas Instruments UC27131NG4 gate drivers applications.

  • Dual-Battery Systems
  • LCD/LCoS/DLP portable and embedded pico projectors
  • UPS systems
  • Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
  • Motor Control
  • DC-DC Converters
  • High-voltage isolated DC-DC converters
  • serial peripheral interface (SPI), I2C
  • Solar inverters
  • 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,

Write a review

Note: HTML is not translated!
    Bad           Good