Parameters |
Output Type |
Bipolar |
Max Output Current |
700mA |
Operating Supply Voltage |
65V |
Power Supplies |
25V |
Interface |
On/Off |
Nominal Supply Current |
2.3mA |
Output Configuration |
High Side |
Output Current |
300mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
2.3mA |
Propagation Delay |
6 μs |
Input Type |
Non-Inverting |
Turn On Delay Time |
6 μs |
Switch Type |
General Purpose |
Min Input Voltage |
8V |
Max Input Voltage |
65V |
Output Characteristics |
OPEN-EMITTER |
Output Current per Channel |
300mA |
Nominal Input Voltage |
65V |
Output Polarity |
SCHMITT TRIGGER |
Ratio - Input:Output |
1:1 |
Voltage - Load |
8V~65V |
Driver Number of Bits |
1 |
Output Peak Current Limit-Nom |
0.9A |
Built-in Protections |
TRANSIENT; OVER CURRENT |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
25V |
Base Part Number |
UC27133 |
Pin Count |
8 |
Number of Outputs |
1 |
UC27133D Overview
It is packaged in the manner of a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum output voltage of Bipolar volts has been specified.I believe it belongs to the UC27133 family.In total, there are 8 terminations.The operation is carried out using the 8 pins.It consists of 1 functions.This operation requires the maximum output current to be decreased to 700mA.It is possible to achieve a high level of efficiency with a supply voltage of 25V.In total, it has 8 pins.In this case, the output current will be set to 300mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this part, the power supply is set to 25V.When using this LED driving board, it is recommended that the supply voltage is set to 65V.This LED driver can handle voltages up to 65V volts.It requires 8V volts as the minimum input voltage.For its operation, a maximum current requirement of 2.3mA is required.
UC27133D Features
Supplied from 25V
UC27133D Applications
There are a lot of Texas Instruments UC27133D Power Switches ICs applications.
- Set-top-box
- Handheld Devices
- Portable Video Game Players
- Hot Swap
- Various applications equipped with buttons
- Solid State Drivers
- PDAs
- Smartphone and PDA
- Mobile Communication Devices
- USB Power Distribution