UC27133DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Base Part Number | UC27133 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Max Output Current | 700mA |
| Operating Supply Voltage | 65V |
| Power Supplies | 25V |
| Interface | On/Off |
| Nominal Supply Current | 2.3mA |
| Output Configuration | High Side |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.3mA |
| Propagation Delay | 6 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 65V |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 300mA |
| Nominal Input Voltage | 65V |
| Output Polarity | SCHMITT TRIGGER |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~65V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC27133DG4 Overview
The LED driver's packaged as a Tube.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of Bipolar volts has been specified.As you can see, it comes from the UC27133 family.A total of 8 terminations have been recorded.For operation, we use the 8 pins.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 700mA in order to meet the operation requirements.As long as the supply voltage is 25V, high efficiency can be achieved.A total of 8 pins are present on it.The output current is set to 300mA in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.There is a voltage supply of 25V volts on this part.In order to achieve the best efficiency, the supply voltage should be set to 65V.Its maximum input voltage is 65V volts.There is a minimum input voltage of 8V volts.The maximum current required for its operation is 2.3mA.
UC27133DG4 Features
Supplied from 25V
UC27133DG4 Applications
There are a lot of Texas Instruments UC27133DG4 Power Switches ICs applications.
- Set-Top Boxes
- USB Power Distribution
- USB Ports/Hubs
- PC Card Hot Swap
- Hot Swaps
- Solid State Drivers
- Hot-Swap Systems
- Hot Swap
- Storage (HDDs, SSDs)
- Mobile Communication Devices
