UC2714D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC2714 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 1A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Driver Number of Bits | 2 |
| Channel Type | Synchronous |
| Turn On Time | 0.1 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2714D Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.A packaging method of Tube is indicated.Gate drivers is mounted in the way of Surface Mount.By using 7V~20V supply voltage, it is able to demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Many related parts can be found under its base part number UC2714.The device is mounted with Surface Mount.The pins are configured with 8 when designing the chip.Mosfet driver is designed specifically to run on 15V volts of power.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 2A for this device.There are several useful electronic components in this subcategory of Peripheral Drivers.8 pins are present on the component.There are 2 outputs integrated for its basis.Mosfet gate drivers can deliver a current of 1A.To increase stability, keep the supply current at 24mA.The operating supply voltage should be set at 15V.STANDARD represents its input.The frequency of 1MHz can improve efficiency.
UC2714D Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC2714D Applications
There are a lot of Texas Instruments UC2714D gate drivers applications.
- High-voltage isolated DC-DC converters
- Portable Media Players
- Uninterruptible Power Supplies (UPS)
- Refrigerator
- Telecom switch mode power supplies
- Industrial Modules
- Isolated Supplies for controller area network (CAN),
- Digitally controlled power supplies
- Active filtering
- Multicolor LED/laser displays
