UC2714DG4
| Parameters | |
|---|---|
| Power Supplies | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 1A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Driver Number of Bits | 2 |
| Channel Type | Synchronous |
| Turn On Time | 0.1 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC2714 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
UC2714DG4 Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.The packaging method is indicated by Tube.Surface Mount is mounted in the way.A supply voltage of 7V~20V demonstrates its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.-40°C~150°C TJ is the allowed temperature range for this device.The input type for this program is Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number UC2714.In this case, Surface Mount indicates how the device is mounted.At the time of design, it is configured with 8 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 2A.This subcategory of Peripheral Drivers has a number of useful electronic components.The component has 8 pins.There are 2 outputs integrated for its basis.Mosfet gate drivers supports a current output of 1A.As a precaution, make sure the supply current is kept at 24mA.With its power supplies of 15V, it solves the power supply problems for diverse applications.STANDARD represents its input.When 1MHz is used frequently, efficiency can be improved.
UC2714DG4 Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC2714DG4 Applications
There are a lot of Texas Instruments UC2714DG4 gate drivers applications.
- Portable computers
- DC-DC Converters
- Telecom switch mode power supplies
- Motor Controls
- Power factor correction (PFC) circuits
- Digitally controlled power supplies
- Isolated Supplies for controller area network (CAN),
- RGB applications
- Pulse transformer drivers
- Solar inverters
