UC2714N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC2714 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 1A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 μs |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC2714N Overview
There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is used.Configuration is supported by 2 drivers.In the direction of Through Hole, gate drivers is mounted.In the absence of a 7V~20V supply voltage, its superiority can be demonstrated.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.This device can operate at temperatures up to -40°C~150°C TJ.Non-Inverting is used as the input type.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number UC2714.You mount it with Through Hole.The pins are configured with 8 when designing the chip.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is an output current limit of 2A for this device.There are several useful electronic components within its subcategory Peripheral Drivers.The board has a total of 8 component pins.An output current of 1A is supported.To ensure high stability, the supply current should be kept at 24mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V.By increasing the frequency of 1MHz, efficiency can be improved.
UC2714N Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC2714N Applications
There are a lot of Texas Instruments UC2714N gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- High-speed communications
- Portable computers
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated switch mode power supplies (SMPS)
- Commercial air-conditioning (CAC)
- Pulse transformer drivers
- A/D drivers
- Portable Media Players
- Isolated Supplies for controller area network (CAN),
