UC2714NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC2714 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Power Supplies | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 1A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.1 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 µs |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2714NG4 Overview
A higher level of flexibility is provided by its 8-DIP (0.300, 7.62mm) package.There is a package in the form of Tube.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Through Hole is mounted in the way.In the absence of a 7V~20V supply voltage, its superiority can be demonstrated.A gate type of N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.The input type for this program is Non-Inverting.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number UC2714.Through Hole is the way it takes to mount the device.There are 8 pins available in the device.In order to operate, a voltage of 15V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 2A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of Peripheral Drivers.A board with 8 component pins is available.Mosfet driver supports an output current of 1A.Mosfet gate drivers is recommended to keep the supply current at 24mA to ensure greater stabilMosfet gate driversy.The power supply 15V of the product solves the power supply problem for a variety of applications.By increasing the frequency of 1MHz, efficiency can be improved.
UC2714NG4 Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC2714NG4 Applications
There are a lot of Texas Instruments UC2714NG4 gate drivers applications.
- Portable computers
- Active filtering
- Solar power supplies
- DC-DC Converters
- High current laser/LED systems
- Portable Media Players
- Line drivers
- Video amplifiers
- Welding
- A/D drivers
