UC2715D
| Parameters | |
|---|---|
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC2715 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 2A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Driver Number of Bits | 2 |
| Channel Type | Synchronous |
| Turn On Time | 0.1 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
UC2715D Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Tube represents the packaging method.The device is mounted in the direction of Surface Mount.WGate driversh a 7V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.The gate type on this device is N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed -40°C~150°C TJ.The input type for this program is Non-Inverting.There are 8 terminations to form the base of its configuration.Numerous related parts are available for its base part number UC2715.You mount it with Surface Mount.At the time of design, it is configured with 8 pins.A supply voltage of 15V is required for operation.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.In the maximum case, the output current can be limited to 2A.This subcategory of Peripheral Drivers has a number of useful electronic components.The board has 8 component pins.The basis of this model has 2 outputs integrated.Mosfet driver supports an output current of 2A.Mosfet gate drivers is recommended to keep the supply current at 24mA to ensure greater stabilMosfet gate driversy.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V.STANDARD represents its input.A higher frequency of 1MHz will improve efficiency.
UC2715D Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC2715D Applications
There are a lot of Texas Instruments UC2715D gate drivers applications.
- Solar inverters
- Portable computers
- Refrigerator
- Multicolor LED/laser displays
- Digitally controlled power supplies
- Motor Controls
- serial peripheral interface (SPI), I2C
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Supplies for Motor Control
- RGB applications
