UC2715DTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UC2715 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 2A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 25 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Driver Number of Bits | 2 |
| Channel Type | Synchronous |
| Turn On Time | 0.1 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2715DTR Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the packaging method.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 7V~20V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.There is a temperature range for this device of -40°C~150°C TJ.The input type for this program is Non-Inverting.Its configuration starts with 8 terminations.Many related parts can be found under its base part number UC2715.The device is mounted using Surface Mount.During design, it is configured with 8 pins.A voltage of 15V is required for its operation.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 2A volts.This subcategory of Peripheral Drivers has a number of useful electronic components.A total of 8 pins are available for component connections.The basis of this model has 2 outputs integrated.The output current supported by the device is 2A.To ensure high stability, the supply current should be kept at 24mA.As a rule of thumb, the operating supply voltage should be set to 15V.There is a STANDARD value associated with its input.Improved efficiency can be obtained based on the frequency of 1MHz.
UC2715DTR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC2715DTR Applications
There are a lot of Texas Instruments UC2715DTR gate drivers applications.
- Pulse transformer drivers
- Industrial Motor Inverter - Power Tools, Robotics
- Head-up and Head mounted displays
- Smart Phones
- General Purpose 3-Phase Inverter
- Commercial air-conditioning (CAC)
- Multicolor LED/laser displays
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Video amplifiers
- Dual-Battery Systems
