UC2715N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC2715 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 2A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 μs |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC2715N Overview
The 8-DIP (0.300, 7.62mm) package offers greater flexibility.Tube represents the package.A total of 2 drivers are integrated into its configuration.Through Hole is mounted in the way of the device.In the absence of a 7V~20V supply voltage, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.Temperature range -40°C~150°C TJ is allowed for this device.Non-Inverting is used as the input type in this program.Its configuration starts with 8 terminations.Many related parts can be found under its base part number UC2715.In this case, Through Hole indicates how the device is to be mounted.The pins are configured with 8 when designing the chip.A voltage of 15V is required for its operation.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 2A that can be achieved.Within this subcategory of Peripheral Drivers, there are several useful electronic components.The component has 8 pins.The device is capable of delivering a current of 2A.As a precaution, make sure the supply current is kept at 24mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V volts.By using 1MHz frequency, efficiency can be increased.
UC2715N Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC2715N Applications
There are a lot of Texas Instruments UC2715N gate drivers applications.
- Line drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- Video amplifiers
- Refrigerator
- RGB applications
- General Purpose 3-Phase Inverter
- Dual-Battery Systems
- Portable Navigation Devices
- Motor Controls
- Industrial Power Supplies
