banner_page

UC2715NG4

Through Hole Tube Obsolete EAR99 Gate Drivers ICs Non-Inverting 2 8-DIP (0.300, 7.62mm) UC2715 Low-Side


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UC2715NG4
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 183
  • Description: Through Hole Tube Obsolete EAR99 Gate Drivers ICs Non-Inverting 2 8-DIP (0.300, 7.62mm) UC2715 Low-Side (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 528.605208mg
Operating Temperature -40°C~150°C TJ
Packaging Tube
JESD-609 Code e4
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Technology BIPOLAR
Voltage - Supply 7V~20V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 15V
Frequency 1MHz
Base Part Number UC2715
Pin Count 8
Max Output Current 2A
Power Supplies 15V
Nominal Supply Current 24mA
Output Current 2A
Max Supply Current 24mA
Propagation Delay 100 ns
Input Type Non-Inverting
Turn On Delay Time 100 ns
Rise Time 60ns
Fall Time (Typ) 60 ns
Rise / Fall Time (Typ) 30ns 25ns
Interface IC Type BUFFER OR INVERTER BASED MOSFET DRIVER
Channel Type Synchronous
Number of Drivers 2
Turn On Time 0.1 µs
Output Peak Current Limit-Nom 2A
Driven Configuration Low-Side
Gate Type N-Channel, P-Channel MOSFET
Current - Peak Output (Source, Sink) 500mA 1A
High Side Driver YES
Logic Voltage - VIL, VIH 0.8V 2V
Turn Off Time 0.1 µs
Height 4.57mm
Length 9.81mm
Width 6.35mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

UC2715NG4 Overview


Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.Tube represents the package.The configuration is supported by 2 drivers.It's mounted on the way to Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 7V~20V supply voltage.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as the input type.Its configuration is based on a total of 8 terminations.Numerous related parts are available for its base part number UC2715.Through Hole is the way it takes to mount the device.During design, it is configured with 8 pins.In order to operate, a voltage of 15V has to be applied.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be 2A volts.Its subcategory of Peripheral Drivers contains various useful electronic components.The component has 8 pins.An output current of 2A is supported.Mosfet gate drivers is recommended to keep the supply current at 24mA to ensure greater stabilMosfet gate driversy.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.By increasing the frequency of 1MHz, efficiency can be improved.

UC2715NG4 Features


Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins

UC2715NG4 Applications


There are a lot of Texas Instruments UC2715NG4 gate drivers applications.

  • Uninterruptible Power Supplies (UPS)
  • Motor Drives
  • Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
  • LCD/LCoS/DLP portable and embedded pico projectors
  • Motor Control
  • RGB applications
  • High frequency line drivers
  • Dual-Battery Systems
  • Head-up and Head mounted displays
  • Portable Navigation Devices

Write a review

Note: HTML is not translated!
    Bad           Good