UC28023DW
| Parameters | |
|---|---|
| Output Type | Transistor Driver |
| Max Output Current | 1.5A |
| Input Voltage-Nom | 15V |
| Number of Channels | 2 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Power Dissipation | 1W |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9V~30V |
| Quiescent Current | 1.1mA |
| Control Features | Current Limit, Enable, Frequency Control, Ramp, Soft Start |
| Max Output Voltage | 13.5V |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 340kHz~460kHz |
| Max Input Voltage | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 60 ns |
| Nominal Input Voltage | 30V |
| Max Duty Cycle | 100 % |
| Input Current | 25mA |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UC28023 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 13V |
UC28023DW Overview
It comes in the 16-SOIC (0.295, 7.50mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. A solid enclosure of Tube surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 9V~30V. Worked in an dc switcher with a -40°C~105°C TA rating. Switching can be done at 340kHz~460kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 16. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Search for "UC28023" to find other relevant dc to dc converter ics. The switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 13V voltage. The dc dc regulator's usual output current is 500mA, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. Switching controller operates at a frequency of 1MHz. The value of DC to DC voltage regulator is set to CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE in order to better satisfy the requirement. When the dc switching is dormant, it uses 1.1mA. It is possible to set the input voltage to 30V for nominal working status. In order to limit the voltage of a dc switcher whose maximum input voltage is 30V, it must be limited by the user. The dc switcher will not provide an output current greater than 1.5A. Depending on the datasheet, the switching converter can output 13.5V volts at its peak. The number of channels available for high-quality communication is 2. It could be possible to satisfy the switching converter for operation with a current flow input of 25mA.
UC28023DW Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE
UC28023DW Applications
There are a lot of Texas Instruments UC28023DW DC to DC converter applications.
- Fire elevators
- Surface processing equipment
- Program control systems
- Computer application technology
- Thermal power
- Industrial robots
- Constant current circuits
- Low output voltage switching power supply circuits
- Medical monitoring systems
- Hydrogen power
