UC2824DWTR
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 8.4V~30V |
| Control Features | Current Limit, Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 8.8V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 340kHz~460kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 80% |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | CURRENT MODE OPERATION ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 1MHz |
| Base Part Number | UC2824 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 13V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
UC2824DWTR Overview
With a 16-SOIC (0.295, 7.50mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). 8.4V~30V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. In this switching controller, the switch can be set to 340kHz~460kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. In addition to "UC2824", there are other relevant dc to dc converter ics you can find. 16 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 8.8V. A 13V voltage of DC regulator was detected in the test statistics. This dc to dc regulator accepts only 30V input voltage at most. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. 1MHz is the frequency of the switching controller. In order to satisfy the need, DC to DC voltage regulator has a value of CURRENT MODE OPERATION ALSO POSSIBLE.
UC2824DWTR Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz
CURRENT MODE OPERATION ALSO POSSIBLE
UC2824DWTR Applications
There are a lot of Texas Instruments UC2824DWTR DC to DC converter applications.
- Direct power supply system
- Household control circuits
- Serial communication converter
- Automatic plug-in machines
- Nuclear power plants
- Mobile phones
- Driver circuits
- Electrical distribution systems
- Electrical power transmission
- Fire elevators
