UC2824N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UC2824 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 13V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.4V~30V |
| Control Features | Current Limit, Enable, Frequency Control, Ramp, Soft Start |
| Topology | Boost |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 340kHz~460kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 80% |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2824N Overview
It comes in a 16-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tube enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 8.4V~30V. Worked in an dc switcher with a -40°C~85°C TA rating. There is a switch at 340kHz~460kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Through Hole. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. You can find other relevant dc to dc converter ics by searching "UC2824". 16 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 13V voltage. It should be fully noted that the dc to dc regulator only accepts 30V input voltage at most. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Switching controller operates at a frequency of 1MHz. The value of DC to DC voltage regulator is set to ALSO OPERATES IN CURRENT MODE in order to better satisfy the requirement.
UC2824N Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE
UC2824N Applications
There are a lot of Texas Instruments UC2824N DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Various precision measuring instruments
- Combined machine tools
- Cutting machine tools
- Product testing
- Computer rooms
- Program control systems
- Industrial robots
- Hydraulic presses
- Remotely powered electric motors
