UC2825ADWTRG4

16 Terminals 8.4V~22V 16-Pin UC2825 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 400kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UC2825ADWTRG4
Package: 16-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 840
Description: 16 Terminals 8.4V~22V 16-Pin UC2825 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 400kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	16
Weight	473.692182mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	CAN ALSO BE CONFIGURED IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Frequency	1MHz
Base Part Number	UC2825
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	2V
Output Type	Transistor Driver
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	8.4V~22V
Control Features	Current Limit, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	8.8V
Topology	Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	400kHz~1MHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	20ns
Supply Current-Max (Isup)	36mA
Synchronous Rectifier	No
Fall Time (Typ)	20 ns
Max Duty Cycle	50 %
Output Phases	1
Height	2.65mm
Length	10.3mm
Width	7.5mm
Thickness	2.35mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UC2825ADWTRG4 Overview

Capsuled in the 16-SOIC (0.295, 7.50mm Width) package, the switching controller suits most application needs. For 2 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tape & Reel (TR) enclosure. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 8.4V~22V and has a 8.4V~22V supply voltage. Worked in a -40°C~85°C TA dc switcher before. Using this switching controller, it is possible to switch at 400kHz~1MHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Frequency Control, Ramp, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. An array of 16 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics will be returned if you search "UC2825". There are a total of 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator must be 8.8V. DC regulator outputs 2V voltage based on test statistics. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. A frequency of 1MHz is used by the switching controller. The value of DC to DC voltage regulator is set to CAN ALSO BE CONFIGURED IN CURRENT MODE in order to better satisfy the requirement. The supply voltage should be 12V. A controller's current should not exceed 36mA.

UC2825ADWTRG4 Features

Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE