UC2825ANG4

16 Terminals 8.4V~22V 16-Pin UC2825 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 400kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UC2825ANG4
Package: 16-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 894
Description: 16 Terminals 8.4V~22V 16-Pin UC2825 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 400kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Weight	1.053808g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	CAN ALSO BE CONFIGURED IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Supply Voltage	12V
Frequency	1MHz
Base Part Number	UC2825
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	2V
Output Type	Transistor Driver
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	8.4V~22V
Control Features	Current Limit, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	8.8V
Topology	Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	400kHz~1MHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	20ns
Supply Current-Max (Isup)	36mA
Synchronous Rectifier	No
Fall Time (Typ)	20 ns
Max Duty Cycle	50 %
Input Current	28mA
Output Phases	1
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UC2825ANG4 Overview

Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. The system can process Transistor Driver dc switching's outputs (s). 8.4V~22V is the operating voltage and supply voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. The switching controller can be switched at 400kHz~1MHz. It is suitable for general dc dc regulator when it is set to Through Hole. Current Limit, Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . An array of 16 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. UC2825 can be searched for other relevant dc to dc converter ics. Total pins of switching converter are 16. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 8.8V. A 2V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 200mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. There is 1MHz frequency setting on the switching controller. As a result, DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE so that the need can be met more directly. The supply voltage should be 12V. A controller's current should not exceed 36mA. It could be possible to satisfy the switching converter for operation with a current flow input of 28mA.

UC2825ANG4 Features

Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE