UC2825AQG3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Terminal Finish | TIN |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.4V~22V |
| Control Features | Current Limit, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 8.8V |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Duty Cycle (Max) | 50% |
| Output Phases | 1 |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | ROHS3 Compliant |
UC2825AQG3 Overview
In the 20-LCC (J-Lead) package, the switching controller meets most application requirements. dc motor controller is suitable for 2 output generation. Tube solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 8.4V~22V. Work well in dc switchers with a -40°C~85°C TA. With this switching controller, you can switch at 400kHz~1MHz. dc dc regulator can be generalized using Surface Mount. Current Limit, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position QUAD . A variety of 20 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. It is recommended that the dc dc voltage regulator's minimum input voltage be 8.8V. Hence, CAN ALSO BE CONFIGURED IN CURRENT MODE is used to better suit the DC to DC voltage regulator's situation.
UC2825AQG3 Features
Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
CAN ALSO BE CONFIGURED IN CURRENT MODE
UC2825AQG3 Applications
There are a lot of Rochester Electronics, LLC UC2825AQG3 DC to DC converter applications.
- Television equipment
- Mobile phones
- Geothermal power
- Direct power supply system
- Sink circuits
- Product testing
- ATMs
- Hydraulic presses
- Product burn-in
- Power supplies of electronic gadgets
