UC2825BDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UC2825 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 2V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~22V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 11V |
| Topology | Boost, Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Supply Current-Max (Isup) | 36mA |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Input Current | 28mA |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 16V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2825BDW Overview
There is a ac to dc converter embedded in package 16-SOIC (0.295, 7.50mm Width) .There is a AC/DC power converter of Tube available.Surface Mount is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -55°C~150°C TJ °C in order to achieve its full performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.Supply voltage (Vcc/Vdd) does not need to exceed 10V~22V .There are a total of 16 terminations.Approximately 16 pins are present on the ac/dc converter.There are 16 pins on the ac-dc converter.If you select the UC2825 family, you will be able to search similar acdc converters.A total of 2 outputs are available for processing.AC to DC converter is included in Switching Regulator or Controllers .Current output is set to 200mA .Its output voltage is2V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .You may read the REACH SVHC standard at No SVHC .Using this ACDC converter, CAN ALSO BE CONFIGURED IN CURRENT MODE is also accessible.At all times, this AC to DC converter should be set to 12V .
UC2825BDW Features
Packaged with 16-SOIC (0.295, 7.50mm Width)
With 16 pins
Output Current at 200mA
UC2825BDW Applications
There are a lot of Texas Instruments UC2825BDW AC DC Converters applications.
- Adapter/Charger for Cell
- Smartphones
- Off--line Battery Charger
- AC/DC Adaptors/Chargers for Cordless Phone
- Automotive Telematics
- Rice Cooker
- AC/DC Adaptors/Chargers for Cell Phones
- Set-top boxes
- Set Top Boxes (STB)
- Standby Power Supplies
