UC2825BDWG4
| Parameters | |
|---|---|
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~22V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 11V |
| Topology | Boost, Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Supply Current-Max (Isup) | 36mA |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 16V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UC2825 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 2V |
| Input Voltage-Nom | 12V |
UC2825BDWG4 Overview
This ac to dc converter is embedded in package 16-SOIC (0.295, 7.50mm Width) .There is a AC/DC power converter of Tube available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -55°C~150°C TJ °C.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .This AC/DC converter is designed for use within the range of 10V~22V supply voltage (Vcc/Vdd).A total of 16 terminations have been recorded.There are 16 pins on the ac/dc converter.A total of 16 pins are present on the ac-dc converter.Similar acdc converters can be found using the UC2825 family.In this AC to DC transformer, there are 2 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .We are setting the output current to 200mA .There is 2V output voltage from this AC/DC converter.As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.It is also possible to determine CAN ALSO BE CONFIGURED IN CURRENT MODE using this ACDC converter.Ensure that this AC to DC converter is always set to 12V .
UC2825BDWG4 Features
Packaged with 16-SOIC (0.295, 7.50mm Width)
With 16 pins
Output Current at 200mA
UC2825BDWG4 Applications
There are a lot of Texas Instruments UC2825BDWG4 AC DC Converters applications.
- Adapters for Handheld Electronics
- Rice Cooker
- Remotely-controlled appliances
- Standby and Auxiliary Power Supplies
- Automotive Clusters
- PDAs
- Portable Apparatus
- WiFi Wireless
- RCC SMPS
- Low power ac?dc Adapters for Chargers
