UC2827DWTR-1G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 678.092244mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO WORK IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 450kHz |
| Base Part Number | UC2827 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 2.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~20V |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Full-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 220kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Nominal Input Voltage | 15V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 91% |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2827DWTR-1G4 Overview
The switching controller fits in the 24-SOIC (0.295, 7.50mm Width) package and is ideal for most applications. The dc motor controller is adquate to generate for 3 outputs. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). A 7.6V~20V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 220kHz. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 24 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. Other relevant dc to dc converter ics can be found by searching "UC2827". 24 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 2.5V. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. Switching controller operates at a frequency of 450kHz. The value of DC to DC voltage regulator is set to CAN ALSO WORK IN CURRENT MODE in order to better satisfy the requirement. 15V is the nominal working voltage. The supply voltage must be 15V.
UC2827DWTR-1G4 Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
CAN ALSO WORK IN CURRENT MODE
UC2827DWTR-1G4 Applications
There are a lot of Texas Instruments UC2827DWTR-1G4 DC to DC converter applications.
- Program control systems
- PSRR circuits
- Flaw detection equipment
- Emergency lighting monitoring equipment
- Drilling machines
- Product burn-in
- Precision electronic equipment
- seismic instrument power circuits
- Direct power supply system
- Driver circuits
