UC2841N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Weight | 1.206102g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CURRENT MODE OPERATION IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 450kHz |
| Base Part Number | UC2841 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 8V~32V |
| Control Features | Current Limit, Enable, Frequency Control, Ramp, Reset, Soft Start |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 30V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 95 % |
| Height | 5.08mm |
| Length | 22.48mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2841N Overview
The switching controller fits in the 18-DIP (0.300, 7.62mm) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 8V~32V voltage are supplied and operated. Work well in dc switchers with a -25°C~85°C TA. Using this switching controller, it is possible to switch at 500kHz. The Through Hole value makes it suitable for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Ramp, Reset, Soft Start is included in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 18 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 20V volts. A search for "UC2841" will reveal other relevant dc to dc converter ics. There are a total of 18 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. A 40V voltage of DC regulator was detected in the test statistics. The dc dc regulator's usual output current is 400mA, which should be noted down when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 95 % on power-up or power-down to ensure reliability. Switching controller operates at 450kHz Hz. The value of DC to DC voltage regulator is set to CURRENT MODE OPERATION IS ALSO POSSIBLE in order to better satisfy the requirement. It is possible to set the input voltage as 30V for nominal working statuses.
UC2841N Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Ramp, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 450kHz
CURRENT MODE OPERATION IS ALSO POSSIBLE
UC2841N Applications
There are a lot of Texas Instruments UC2841N DC to DC converter applications.
- Program control systems
- seismic instrument power circuits
- Alternators
- Scientific research
- Network technology
- CMM
- Servo drive system
- Smart grid
- Electric water heaters
- Electric heating, lighting
