UC2842ANG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 11V |
| Terminal Pitch | 2.54mm |
| Frequency | 450kHz |
| Base Part Number | UC2842 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Buck, Buck-Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 25mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 25V |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2842ANG4 Overview
The switching controller fits in the 8-DIP (0.300, 7.62mm) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tube rating. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 10V~30V. Suitable for a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the Up to 500kHz position. It is suitable for general dc dc regulator when it is set to Through Hole. Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. In addition to "UC2842", there are other relevant dc to dc converter ics you can find. There are only 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Test statistics indicate DC regulator outputs 15V voltage. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Switching controller operates at 450kHz Hz. It is possible to set the input voltage to 25V for nominal working status. Switching controller is necessary to supply a voltage of 11V. There should be 25mA more than 25mA amps of current supplied to the controller.
UC2842ANG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 450kHz
UC2842ANG4 Applications
There are a lot of Texas Instruments UC2842ANG4 DC to DC converter applications.
- Smoke exhaust equipment
- Electrical distribution systems
- Gear/thread machining machines
- Series voltage regulation circuits
- Smoke prevention equipment
- CMM
- Injection molding machinery
- Sensitive electronic devices
- Access control systems
- Digital display device
