UC2842AQD8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.608178mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | UC2842 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Quiescent Current | 11mA |
| Control Features | Frequency Control |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2842AQD8 Overview
With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) are supported. 10V~30V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TA dc switcher. The switching controller can be switched at Up to 500kHz. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 8 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "UC2842". 8 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 15V. Considering the dc to dc regulator can only accept 25V input voltage, it is important to take note of this. You should note down the dc dc regulator's usual output current of 200mA when you start a project. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at 500kHz Hz. Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series. In a dormant state, the dc switching uses 11mA.
UC2842AQD8 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz
UC2842AQD8 Applications
There are a lot of Texas Instruments UC2842AQD8 DC to DC converter applications.
- Combined machine tools
- Post equipment
- Hydro power
- Driver circuits
- Packaging
- Computer application technology
- Hydrogen power
- Medical equipment
- Automatic plug-in machines
- Computer monitoring equipment of building
