UC2842BDG
| Parameters | |
|---|---|
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UC284*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Max Supply Current | 17mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 25V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
UC2842BDG Overview
It comes in a 14-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 10V~30V. Suitable for a -25°C~85°C TA dc switcher. This switching controller can switch at Up to 500kHz. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. The 14 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 15V. UC284*B can be used to locate other relevant dc to dc converter ics. 14 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, the DC regulator outputs 13.5V voltage. It should be noted that the dc to dc regulator only accepts 25V voltage as input voltage. The dc dc regulator's usual output current is 20mA, which should be noted down when you start a project. voltage regulator dc to dcs with a 96 % duty cycle are designed to be reliable when powered on and powered off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at a frequency of 500kHz. In the presence of a current greater than 17mA, the component may fail to operate properly and may be damaged.
UC2842BDG Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 500kHz
UC2842BDG Applications
There are a lot of ON Semiconductor UC2842BDG DC to DC converter applications.
- Industrial robots
- Special machining machine tools
- Driver circuits
- Various CNC machine tools
- Flexible manufacturing cells
- Television equipment
- Sink circuits
- Sensitive electronic devices
- Energy management systems
- Smoke exhaust equipment
