UC2842BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 52kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UC284*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 30V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2842BDR2G Overview
Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 10V~30V volts and has 10V~30V supply voltage. Suitable for working in an dc switcher that has a -25°C~85°C TA. This switching controller can switch at Up to 500kHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 14 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. In addition to "UC284*B", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 14 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. DC regulator outputs 13.5V voltage according to the test statistics. It should be noted that the dc to dc regulator only accepts 30V voltage as input voltage. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 96 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. 52kHz is the frequency of the switching controller.
UC2842BDR2G Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 52kHz
UC2842BDR2G Applications
There are a lot of ON Semiconductor UC2842BDR2G DC to DC converter applications.
- Wide-range voltage regulation circuits
- Printing equipment
- Die casting equipment
- Window air conditioners
- Surface processing equipment
- Surge protection circuits
- Low output voltage switching power supply circuits
- Special machining machine tools
- Direct power supply system
- Servo drive system
