UC2844AD8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 11V |
| Frequency | 450kHz |
| Base Part Number | UC2844 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 17mA |
| Nominal Supply Current | 17mA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Buck, Buck-Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 25mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 25V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2844AD8 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 10V~30V voltage are supplied and operated. Suitable for work in a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at Up to 500kHz. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Frequency Control is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. An array of 8 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. UC2844 can be used to locate other relevant dc to dc converter ics. There are only 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. A 15V voltage of DC regulator was detected in the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. Switching controller operates at 450kHz Hz. Input voltage can be set to 25V for nominal working status. Switching controller is necessary to provide a voltage of 11V. The controller should not be supplied with more current than 25mA. There is 17mA supply current for it. There is 17mA nominal current supply for this the controllers dc.
UC2844AD8 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2844AD8 Applications
There are a lot of Texas Instruments UC2844AD8 DC to DC converter applications.
- Printing equipment
- Computed tomography (CT)
- Power supplies of electronic gadgets
- Access control systems
- Large fire protection systems
- Television equipment
- Constant current circuits
- Milling machines
- Hydraulic presses
- Photovoltaic power
