UC2844AD8TRG4
| Parameters | |
|---|---|
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 25mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 25V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 11V |
| Frequency | 450kHz |
| Base Part Number | UC2844 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Buck, Buck-Boost, Flyback, Forward |
UC2844AD8TRG4 Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. A 10V~30V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~85°C TA rating. With this switching controller, you can switch at Up to 500kHz. dc dc regulator is made easier with Surface Mount. Frequency Control provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 8 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. In addition to "UC2844", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 8. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 15V voltage according to the test statistics. You should note that the dc dc regulator's usual output current is 200mA. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 450kHz is set for the switching controller. You can set the input voltage to 25V for nominal working status. There must be a voltage supply of 11V volts. You should not supply more current than 25mA to the controller.
UC2844AD8TRG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2844AD8TRG4 Applications
There are a lot of Texas Instruments UC2844AD8TRG4 DC to DC converter applications.
- Surface processing equipment
- Elevator lighting
- Household control circuits
- Handheld GPS
- Program control systems
- ATMs
- Photovoltaic power
- Balance equipment
- Various precision measuring instruments
- Communication system
