UC2844ADM
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UC*84 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 11mA |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Quiescent Current | 11mA |
| Output Power | 25W |
| Control Features | Frequency Control |
| Topology | Boost, Buck, Buck-Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Isolation | Isolated |
| Duty Cycle (Max) | 48% |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UC2844ADM Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 10V~30V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~85°C TA. Switching can be done at Up to 500kHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Frequency Control for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . Various 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 15V. UC*84 can be searched for other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. According to the test statistics, DC regulator outputs 5V voltage. At most, the dc to dc regulator accepts 30V input voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is 500kHz frequency setting on the switching controller. A dc switching in a dormant state uses 11mA. The supply current of the voltage controller is 11mA.
UC2844ADM Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
UC2844ADM Applications
There are a lot of Microsemi Corporation UC2844ADM DC to DC converter applications.
- Smoke prevention equipment
- Energy management systems
- Cutting machine tools
- Drilling machines
- Electric water heaters
- Wide-range voltage regulation circuits
- Telecommunications equipment
- Product burn-in
- Pipe bending machines
- Program control systems
