UC2845AQDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 145.603151mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | UC2845 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Quiescent Current | 11mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2845AQDR Overview
Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Cut Tape (CT) is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. 7.6V~30V is the supply voltage and the operating voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. dc dc regulators can be carried out with Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 14 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. In addition to "UC2845", there are other relevant dc to dc converter ics you can find. In total, switching converter has 14 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 15V voltage according to the test statistics. The dc to dc regulator is limited to 25V input voltage. You should note down the dc dc regulator's usual output current of 200mA when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Switching controllers work at 500kHz Hz. It belongs to the dc to dc voltage regulator series Automotive, AEC-Q100. In a dormant state, the dc switching uses 11mA.
UC2845AQDR Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
UC2845AQDR Applications
There are a lot of Texas Instruments UC2845AQDR DC to DC converter applications.
- CMM
- Various CNC machine tools
- Electrical distribution systems
- Cutting machine tools
- Hydraulic presses
- Photovoltaic power
- Energy management systems
- Flaw detection equipment
- Remotely powered electric motors
- Milling machines
