UC2845BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UC284*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.05V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 25V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 275kHz |
| Max Duty Cycle | 48 % |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2845BDR2G Overview
It comes in the 14-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 7.6V~30V. Suitable for a -25°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 500kHz . The Surface Mount allows it to be used for dc dc regulator in general. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 14. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 15V nominal DC switcher's voltage input. Search for "UC284*B" to find other relevant dc to dc converter ics. Switching converter has a total of 14 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Statistically, the DC regulator outputs 5.05V voltage. At most, the dc to dc regulator accepts 25V input voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. It is set to 48 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is a maximum frequency of 275kHz for this dc regulators.
UC2845BDR2G Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
UC2845BDR2G Applications
There are a lot of ON Semiconductor UC2845BDR2G DC to DC converter applications.
- Geothermal power
- Communication system
- Medical monitoring systems
- Milling machines
- Electrical distribution systems
- Handheld GPS
- Power supplies of electronic gadgets
- Flexible manufacturing cells
- Mobile phones
- Plate bending machines
