UC2845N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 500kHz |
| Base Part Number | UC284* |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.05V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Power Dissipation | 1W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Quiescent Current | 500μA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 48% |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
UC2845N Overview
The switching controller fits in the 8-DIP (0.300, 7.62mm) package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tube solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 7.6V~30V. Workable in an dc switcher where -25°C~85°C TA is the -25°C~85°C TArm. Through Hole makes it suitable for general dc dc regulator. The dcdc regulator features Frequency Control for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "UC284*". 8 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Based on the test statistics, DC regulator outputs voltage 5.05V. At most, the dc to dc regulator accepts 25V input voltage. You should note that the dc dc regulator's usual output current is 1A. Switching controller operates at 500kHz Hz. A circuit should contain 30V in order to ensure the voltage regulator dc to dc runs safely and reliably. In dormant mode, 500μA is used.
UC2845N Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz
UC2845N Applications
There are a lot of ON Semiconductor UC2845N DC to DC converter applications.
- Computer application technology
- Various precision measuring instruments
- Window air conditioners
- Computer-related products
- Hydro power
- Elevator lighting
- Thermal power
- Analog precision reference circuits
- Domestic water pumps
- Communication system
