UC2845NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 450kHz |
| Base Part Number | UC2845 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Power Dissipation | 1W |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 12V~28V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 25mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 25V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 50 % |
| Input Current | 11mA |
| Duty Cycle (Max) | 48% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2845NG4 Overview
In the 8-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 12V~28V. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 500kHz. It is suitable for general dc dc regulator when it is set to Through Hole. DCDC regulator is controlled efficiently by Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. 8 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Searching "UC2845" will return other relevant dc to dc converter ics. There are only 8 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 13.5V voltage. You should note that the dc dc regulator's usual output current is 200mA. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. There is 450kHz frequency setting on the switching controller. For nominal working status, the input voltage can be set as 25V. There should be 25mA more than 25mA amps of current supplied to the controller. For operation, the switching converter could be satisfied with 11mA current flow input.
UC2845NG4 Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2845NG4 Applications
There are a lot of Texas Instruments UC2845NG4 DC to DC converter applications.
- Computed tomography (CT)
- Electrical power transmission
- Electrical distribution systems
- Various precision measuring detectors
- Medical monitoring systems
- Product burn-in
- Sensitive electronic devices
- Analog precision reference circuits
- Grinders
- Medical equipment
