UC2846DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UC2846 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Power Dissipation | 1W |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 6.95V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 15V |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2846DWG4 Overview
As a result of 16-SOIC (0.295, 7.50mm Width) compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. A 6.95V~40V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. 16 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. UC2846 can be searched for other relevant dc to dc converter ics. 16 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 13.5V voltage. normally, the dc dc regulator's output current is 500mA, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. The switching controller works at a frequency of 500kHz. 15V is the nominal working voltage.
UC2846DWG4 Features
Transistor Driver Outputs
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
UC2846DWG4 Applications
There are a lot of Texas Instruments UC2846DWG4 DC to DC converter applications.
- Automation technology
- Imported equipment
- Television equipment
- Electric water heaters
- Analog precision reference circuits
- Plate bending machines
- Direct power supply system
- Window air conditioners
- Medical equipment
- Radio equipment
