UC2846DWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 450kHz |
| Base Part Number | UC2846 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 6.95V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 15V |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2846DWTR Overview
With a 16-SOIC (0.295, 7.50mm Width) package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 2 output generation. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 6.95V~40V. Suitable for working in an dc switcher that has a -40°C~85°C TA. With this switching controller, you can switch at 500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. Search for "UC2846" to find other relevant dc to dc converter ics. There are 16 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Statistically, DC regulator outputs 13.5V volts. You should note that the dc dc regulator's usual output current is 500mA. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. Switching controllers work at 450kHz Hz. Input voltage can be set to 15V for nominal working status.
UC2846DWTR Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2846DWTR Applications
There are a lot of Texas Instruments UC2846DWTR DC to DC converter applications.
- Correction machines
- Planers
- Emergency lighting monitoring equipment
- Laboratories
- Experimental setup
- USB circuits
- Servo drive system
- Surface processing equipment
- Domestic water pumps
- Bending machines
