UC2846NG4

16 Terminals 6.95V~40V 16-Pin UC2846 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UC2846NG4
Package: 16-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 192
Description: 16 Terminals 6.95V~40V 16-Pin UC2846 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Weight	1.053808g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	Through Hole
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Max Power Dissipation	1W
Technology	BICMOS
Terminal Position	DUAL
Frequency	450kHz
Base Part Number	UC2846
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	3V
Output Type	Transistor Driver
Max Output Current	50mA
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Power Dissipation	1W
Output Current	500mA
Voltage - Supply (Vcc/Vdd)	6.95V~40V
Control Features	Current Limit, Enable, Frequency Control, Soft Start
Topology	Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	CURRENT-MODE
Frequency - Switching	500kHz
Max Input Voltage	40V
Control Technique	PULSE WIDTH MODULATION
Rise Time	50ns
Synchronous Rectifier	Yes
Fall Time (Typ)	50 ns
Nominal Input Voltage	15V
Max Duty Cycle	50 %
Duty Cycle	50 %
Output Phases	1
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UC2846NG4 Overview

With a 16-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 2 output generation. Tube solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. A 6.95V~40V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 500kHz that can be used with this controller. As it has a Through Hole value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "UC2846". There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Statistically, the DC regulator outputs 3V voltage. normally, the dc dc regulator's output current is 500mA, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. Switching controllers operate at 450kHz frequencies. You can set the input voltage to 15V for nominal working status. The dc switcher's maximum input voltage is 40V, so users must limit the voltage accordingly. A dc switcher can only produce an output current of 50mA.

UC2846NG4 Features

Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz