UC2853ADTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Voltage - Supply | 12V~40V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 1.27mm |
| Frequency | 115kHz |
| Base Part Number | UC2853 |
| Output Voltage | 15V |
| Input Voltage-Nom | 3V |
| Supply Voltage-Max (Vsup) | 40V |
| Power Supplies | 16V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 2.9V |
| Output Current-Max | 10A |
| Frequency - Switching | 56kHz~94kHz |
| Input Voltage (Max) | 3.1V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 10mA |
| Switcher Configuration | SINGLE |
| Mode | Average Current |
| Current - Startup | 250μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC2853ADTR Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) format.As you can see, it's packaged in a Tape & Reel (TR)-shape.It has a Surface Mount mounting type.12V~40V should supply the voltage to it.Device -25°C~85°C is set to operate.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.A number of 8 terminals can be found on the device.The startup current is 250μA.The pin number of the component remains 8.In terms of its best part, the device has a number of UC2853.There is a switching frequency of 56kHz~94kHz.The system can operate with a minimum input voltage of 2.9V.In a way, it's a subclass of Switching Regulator or Controllers.There is a voltage (Max) input to this device.An accurate operation is possible with 115kHz as the frequency.A maximum of 10A output current is provided by itA 16V-volt supply is always used to power the component.If isup is greater than 10mA, then the supply current is too high.Device supplies are 16V.As long as the 15V output is used, it can be controlled.
UC2853ADTR Features
UC2853ADTR Applications
There are a lot of Texas Instruments UC2853ADTR PFC PMICs applications.
- PLL (Phase-Locked Loop)
- Gateway module
- Automated test equipment
- Noise filters
- Op-amps
- xEV
- μC power
- Ultrasound
- Ethernet condition monitoring vibration sensor
- Measurement and control euipment
