UC2854AN
| Parameters | |
|---|---|
| Pin Count | 16 |
| Output Voltage | 7.5V |
| Input Voltage-Nom | 18V |
| Supply Voltage-Max (Vsup) | 20V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 10V |
| Output Current-Max | 1.5A |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 12mA |
| Switcher Configuration | BOOST |
| Output Voltage-Max | 7.6V |
| Output Voltage-Min | 7.4V |
| Mode | Average Current |
| Current - Startup | 250μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Frequency | 200kHz |
| Base Part Number | UC2854 |
UC2854AN Overview
In a 16-DIP (0.300, 7.62mm) package, it is available.There is a Tube package for this product.Through Hole is the device's mounting type.The voltage supply of 10V~20V should be used to operate it.At -40°C~85°C, the device operates.There are other IC types in this part, such as POWER FACTOR CONTROLLER.An array of 16 terminals is located on the gadget.Current startup is 250μA.There is no change to the pin number of the component.One of the best parts of the device is the fact that it has a number of UC2854.The 16 pins are summed up.Depending on the input voltage, it can operate at a minimum of 10V volts.I suppose it can be considered a subclass of Switching Regulator or Controllers.The maximum input voltage (Max) of the circuit is 20V.Keeping its frequency at 200kHz allows it to maintain good accuracy.The maximum output current it can deliver is 1.5AIt is always necessary to power the component with a 18V volt supply in order for it to operate.12mA is the maximum supply current.It can be operated with the output of 7.5V.
UC2854AN Features
UC2854AN Applications
There are a lot of Texas Instruments UC2854AN PFC PMICs applications.
- IBIS model
- Solar inverters
- Gateway module
- Vibration sensor
- TVS diodes
- Low-voltage microprocessor power supplies
- HVAC (Heating, Ventilation, and Air Conditioning)
- DSP power
- Post DC-DC regulation
- Signal chain
